AUDIO INTERNATIONAL, INC.
2/99
9
Document #540156, Rev. IR, Model No.: VCP-011-MS-x
2.8
Connector / Mating Connector Information
Model #
Connector
Mating Connector
VCP-011-MS
DAMA-15P DAMA-15S
D20418-2 Female Screw Lock
D20419-18 Male Screw
Backshell
DE24657
VCP-011-MS-1
RD15M10JV30 RD15F10JVL0
ALL
BNC1 Video Output
AMPHENOL 31-70008 or
equivalent.
2.9
Post Installation Test
2.9.1 Verify that all audio and video inputs are available to the system.
Load the video player. Use the VCP front panel controls or the
hand-held remote control unit to select PLAY. Check for a picture
on the appropriate monitor and verify that the VCP audio can be
heard through the speaker and/or the headphone system.
3.0 Operation
3.1
Front Panel Controls
The video player has several front panel controls. To play, insert the
chosen video cassette into the VCP. The video cassette will automatically
begin to play when the tape is inserted. The video cassette picture will be
displayed on the selected monitor screen.
When the VCP reaches the end of the cassette, the video player will
automatically rewind the cassette. Once the VCP has rewound the
cassette, the VCP will stop. The EJECT button on the front panel must be
pressed to unload the cassette.
If power is interrupted while a cassette is in the video player, the player
will shut down. The cassette tape must be ejected and reinserted into the
VCP to play the tape again.
Refer to the Operation Guide (AI Document 560039) for further operating
instructions.
