Audio International, Inc
.
RCP-201-01-x Installation & Operation Manual
Document # 540204, Rev IR, 1/2001
Page 14 of 19
8.2 Troubleshooting
Chart
Problem Possible
Cause
Solution
No sound
½
Unit is improperly
installed
½
No cassette in source
unit.
½
Audio system not
powered or active
½
Tuner not activated
½
Cassette tape defective
•
28 VDC power and video
input is present
•
Insert tape in source unit
•
Verify audio system is in active
mode
•
Turn the tuner to the ‘ON’ position
•
Replace cassette tape
No power
½
Faulty wiring
½
Circuit breaker has
opened
•
C28 VDC. Check
connections
•
Reset circuit breaker
Poor audio quality
½
Audio controls not
properly adjusted
•
Adjust output level
Buttons not operating
½
Moisture may have
condensed inside unit.
•
Allow unit to warm to room
temperature and moisture has
evaporated.
•
Contact AI Product Support
Cassette tape cannot
be loaded
½
Foreign object in disc slot
•
Remove foreign object
•
Contact AI Product Support
Poor AM-FM tuner
reception
½
Antenna connection may
be faulty
•
Verify antenna connections
Unit does not eject
cassette tape
½
EJECT button not
functioning
•
Play cassette to end for automatic
cassette ejection
•
Contact AI Product Support
