DVD-301-01-x Installation & Operation Manual
Document # 540257, Rev B, 08/2005
Page 10 of 39
3.2.2
If damage has occurred during shipping, a claim should be filed
with Audio International WITHIN 24 hours and a
Return Request
Authorization Number
shall be obtained from AI by contacting the
Repair Department at 501.801.0640. Repackage the unit in its
original packaging materials and return it to AI following instructions
given by the AI representative. Refer to the front cover of this
manual for address. If no return is necessary, retain the packing
list and the packing materials for storage.
3.3
Cautions & Warnings
3.3.1 It is important to do a pin-to-pin power and ground check on all
connectors. Ensure that power and ground are applied only
where specified. Damage to the unit may result if power or
ground is applied to the wrong points.
3.3.2
DO NOT
connect or disconnect the unit while power is applied.
3.3.3
DO NOT
remove any factory-installed screws. Damage to the
unit may result and void any warranties.
3.3.4
DO NOT
drop the unit or subject it to strong shock. The unit
contains glass parts that may break or crack.
3.3.5
DO NOT
place foreign objects into openings. Contact with foreign
objects may result in dangerous voltage or electric shock.
3.3.6
DO NOT
place near strong magnetic fields, radiators or other heat
sources.
3.3.7
DO NOT
use this unit other than for its intended purpose. Doing
so might lead to electric shock or injury.
3.3.8
DO NOT
use near water, moisture, or volatile sprays. Do not use
any type of solvent when cleaning (surface damage may occur).
3.3.9
DO NOT
look directly into the laser beam through the disc tray
opening. Eyesight may be damaged.
3.3.10
DO NOT
place fingers in disc tray when the tray is moving. Tray
may close on fingers and may cause injury.
3.3.11
DO
NOT
expose unit to sun or bright light. Damage to the sensor
will result.
