AUDIO-GD R-7 Balanced R2R DAC FPGA 2x TCXO I2S HDMI Amanero 32bit 384kHz DSD512
I. NOTES
The product has already been burn-in in our workshops for more than 300 hours. On receipt
and to finish burn-in the device, simply turn it on and start your music. The burn-in process
also works with a minimum volume.
The product includes amplifiers and power supplies in pure Class A that produce heat. We
do not recommend stacking other devices or objects directly above the product. It is
necessary to leave a free space of at least 3cm above the unit. Similarly, we strongly advise
against placing this product on another device that also releases heat.
It is strongly recommended to turn off the device before connecting new sources or outputs.
After turning off the unit, please wait at least 30 seconds before turning it on again.
II. UPDATES
In order to simply perform updates of the device when they are available, simply connect the
device to your computer via the Micro USB port on the back panel.
III. INPUT SELECTION
To select a source, simply use the Selector buttons on the left and right.
IV. MODES & FILTERS
The device offers several modes of use in order to adapt to everyone's needs. These can be
selected via the buttons on the front panel.
Note: It is strongly recommended to decrease the volume of your amplifier and stop playback
when changing modes.
To access the mode selection, simply press the Settings button. The digits on the display
then start flashing and you can make your changes. To exit the configuration menu, simply
do not press any button for 5 seconds.
●
Menu : Page 1
OS (Oversampling) :
“O” to select Oversampling mode
“N” to select NOS mode (Non-Oversampling)
Modes (OS and NOS) :