7
INSTALLATION NOTES
The first step of installing a speaker system is thorough planning. Choose a suitable lo-
cation for your speaker components carefully. Follow these suggestions to ensure proper
imaging and maximum performance:
1. Choose a location that offers the least amount of obstruction between the
components and your ears. Pay also attention to the position of the seats,
headrests and other constructional systems in the interior space of the car.
2. Try to mount the speakers on the same arrangement. They should be
installed at the same height and directly across from each other. Do not
mount one speaker higher, lower, further forward or further backward from
the opposite speaker.
3. The tweeter should always be installed as close as possible to the midbass speaker.
4. Always take a look behind the chosen mounting locations to ensure
that there is proper clearance for the rearside of the speakers and avoid
obstructions such as window tracks, wire harnesses, gas tank etc.
5. Maximum performance is achieved when the speaker is securely mounted to
a door panel or rear speaker deck. There should be no gaps between the
speaker basket and the mounting surface
IMPORTANT
1. The ATLAS AS speaker components are made out of very precious
materials like aluminum cones. Don’t touch the aluminum cone with
fingers or sharp tools. Please handle the components with care,
otherwise they will get damaged.
2. Please pay attention to the correct polarity (+ or -) for all terminals and connections.
3. Never connect the speakers to the electrical ground or with the body of the vehicle.
ENGLISH
