
53
Camera Connections G71-CCD0072
Name
Connector/Color Function
CCD-CVBS-IN
RCA yellow
Video signal input from the rear camera
FRONT-CCD-IN
RCA yellow
Video signal input from the front camera
REVERSE IN
blue
The ESX device switches to the „CCD CVBS IN“ input as soon
as „REVERSE IN“ is supplied with 12V and „CCD-Camera“ c
heckbox in the option menu under „DISPLAY“ is activated.
CCD-POWER OUT
yellow
12V power supply output for an aftermarket rear view
camera with max. 100mA. 12V will be supplied, as soon as
„REVERSE-IN“ is supplied with 12V.
FRONT CCD-POWER OUT red
12V power supply output for an aftermarket rear view camera
with max. 500mA. 12V will be supplied, as soon as the ESX
device is turned on. Make sure that your camera is suitable
for continuous operation.
GND
black
Ground terminal of the power supply of an optional camera
(front and rear).
Important Note:
Connect the reverse signal (12V when reverse gear is engaged, for example, also by
reversing light) of the vehicle to „REVERSE“ (blue cable). The „GND“ and „CCD POWER OUT“ cables must not
be connected obligatorily, but can be used as a power supply for the camera. also by reversing light.
Now activate the „CCD-Camera“ checkbox under APPS -> OPTIONS -> DISPLAY at the ESX device.
Operation note:
When the reverse gear is engaged, the device does not allow any other operation, all the
buttons and controller except volume control are blocked for security reasons. If the device is switched off
and the reverse gear is engaged, the device does not even turn on.
Front View Camera
Connect the camera via RCA to the yellow RCA connector „FRONT CCD IN“.
Switch to „Camera“ or „Front Camera“ in the menu „AV/TV“ to display your camera view.
Audio/Video Outputs G71-MNV0011
Name Connector/Color
AUDIO L OUT/ZONE-1
RCA white
AUDIO R OUT/ZONE-1
RCA red
V-OUT1/ZONE-1
RCA yellow
AUDIO L OUT/ZONE-2
RCA white
AUDIO R OUT/ZONE-2
RCA red
V-OUT2/ZONE-2
RCA yellow
Important Note:
Connection for e.g. headrest monitors in the rear. The audio/video outputs is always the
same signal to which will be played just on the ESX device. An independent input source selection is not
possible.
10
11
INTERCONNECTION
Summary of Contents for ESX VN630D
Page 58: ...58 NOTES...
Page 59: ...59 NOTES...