2
NOTE:
For many vehicle models, a vehicle-specific 1-DIN installation set is required for professional
installation. In order to be able to use the existing steering wheel remote control of your ve-
hicle, a vehicle-specific adapter may also be required. You can obtain information about this
on the Internet or from your specialist dealer.
ACC BUTTON
With the ACC button next to the SD card slot, you can operate the naviceiver without the
ignition switched on. Press the button for about 2 seconds and the device will turn on. To
switch off, press the button again for 2 seconds.
IMPORTANT NOTES
This guide is an aid for the professional installation of the device.
Please note the following notes before installation:
• Always handle all parts of the device and the components of your vehicle with care.
• Under all circumstances observe the regulations of the vehicle manufacturer and do not
make any changes to the vehicle which could impair driving safety.
• For safety reasons, disconnect the vehicle battery’s ground connection before installa-
tion.
• Please always pay attention to the correct polarity of the connections.
• Please do not modify any harnesses or connections of the device or the vehicle as this
may affect the warranty.
• Make sure that no cables are squashed or cause a short circuit.
• Do not lay cables in front of the airbags, e.g. in the dashboard or in a way that affects
their function.
