11
Remove the original head unit in the
glove compartment. Use the appropri-
ate unlocking tool for this.
Then lay the 1 meter long connection
cable of the monitor through the dash-
board to the installation location of the
monitor and connect it there.
Now you can attach the monitor to the vehicle-specific installation frame. Please note
the installation instructions for your vehicle.
Then slide the ESX main device into the
installation slot in the glove compart-
ment until the retaining clips snap into
place.
Now connect the ESX main device as
described on page 6. Depending on the
vehicle, a vehicle-specific adapter set is
required, e.g. for vehicles with a Quad-
lock connection.
INSTALLING THE DEVICE WITH VNA-EXT-KIT100
Summary of Contents for ESX VN1050-4G
Page 15: ...15 NOTES...
