Audio Design ESX QUANTOM QXE42 Manual Download Page 5

5

INSTALLATION NOTES

The first step of installing a speaker system is thorough planning. Choose a suitable location for your speak-

er components carefully. Follow these suggestions to ensure proper imaging and maximum performance:

1.  Choose a location that offers the least amount of obstruction between the components and your ears. 

Pay also attention to the position of the seats, headrests and other constructional systems in the interior 

space of the car.

2.  Try to mount the speakers on the same arrangement. They should be installed at the same height and 

directly across from each other. Do not mount one speaker higher, lower, further forward or further back-

ward from the opposite speaker.

3.  The tweeter should always be installed as close as possible to the midbass speaker.
4.  Always take a look behind the chosen mounting locations to ensure that there is proper clearance for the 

rearside of the speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.

5.  Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speak-

er deck. There should be no gaps between the speaker basket and the mounting surface 

6.  Please handle the components with care, otherwise they will get damaged.
7.  Please pay attention to the correct polarity (+ or -) for all terminals and connections.
8.  Never connect the speakers to the electrical ground or with the body of the vehicle.

ENGLISH

WARRANTY

This ESX product has a 2-year warranty from date of purchase.
To maintain your warranty coverage upright, keep your original purchase receipt to prove the date of pur-

chase. Any damage of the product, based on incorrect or improper use, accident, incorrect and improper 

installation, modification of the barcode, natural disaster or any non-appropriate interventions, repairing or 

alteration outside our factory or authorized service centers, and caused by other acts, which are unauthor-

ized, because have been made in an incompetent manner, is excluded from the warranty. This warranty is 

limited only to defective parts and especially excludes all incidental or consequential damages and those 

who are associated with. 
Please return the defective product along with a copy of your purchase receipt and a detailed malfunction 

description to the dealer from whom you purchased the product.

Summary of Contents for ESX QUANTOM QXE42









Reviews: