2048 Mercer Road, Lexington, KY 40511-1071 USA
800-322-8346 • 859-233-4599 • Fax: 859-233-4510
[email protected] • www.audioauthority.com
752-728
Rev. 20180410
Serial Commands
STRUCTURE
COMMAND
RESULT
[PRESS#_#]
[PRESS1_1]
Notify Main Controller PSB 1 pressed on unit1.
[RELEASE#]
[RELEASE1]
Notify Main Controller PSB 1 released on unit 1.
[BLINK#_#]
[BLINK10_3,5,6]
Blinks selected PSB position(s) on unit 10.
[LEDON#_#]
[LEDON2_1,3,7]
Activates selected LED(s) on unit 2.
[LEDOFF#_#]
[LEDOFF2_1,3,7]
Deactivates selected LED(s) on unit 2.
[LEDALLOFF]
[LEDALLOFF]
Turn off all LEDs on all units.
Power
Connect the 12V power adapter (included) to the jack marked Power Input.
The Power Bus port may be connected to the 1704, or other device sharing the
power adapter.
Installation
• Attach the player and the 1807 modules to a flat surface with the
screws provided.
• Connect push-buttons. Push-buttons should be four-wire momentary
switches, and can be illuminated (2-5 volt LED).
• Set the Module ID switches and mark the case for identity.
• Connect multiple 1807 modules via Cat 5/6 using the RS-485 ports.
• Connect the RS-232 cable from one 1807 to a compatible media player.
• Connect the power adapter to AC power, then to the 1807 power port.
• Call Audio Authority with questions that are not addressed in this manual.
