3
Package Contents
Before installing this product, please check the packaging and make certain the
following items are contained in the shipping carton:
• 1710B Headphone Demonstrator
• DC Power Adapter
• User Manual
Features
• High quality headphone amplification
• Switching or distribution behavior
• Adjustable demonstration timeout in switching mode
• Automatic selection of customer audio source when connected
• Theft detection and integral alarm
• Multiple units can easily be connected together for any size system
Feature Switch Settings
Switch Off (away from edge)
On (toward edge)
1
Gain = 0dB
Gain = 6dB
2
One active product per board
One active product per system
3
Not used
Not used
4
Switcher mode (one on)
Distribution mode (all on)
Audio Sources and Customer Auto Demo
Connect a music player to the Default Input jack as the audio source. If desired,
provide a 3.5mm cord connected to the Customer Input so that customers may use
their own music players to demonstrate headphones. When audio is detected on
the Customer Input jack, the customer device is selected as the audio source. If no
audio is detected on the Customer Input for 7.5 seconds, the 1710B switches back
to the Default Input.
Audio Bus Out
The bus output feeds the currently selected audio input (Default or Customer) to
more 1710B modules or other audio devices in the system. Connect a 3.5mm patch
cord from the first 1710B bus output to the second 1710B Default input, etc. One
linked system sharing a Default Input also must share one Customer input (
do not
use any Customer inputs besides the first 1710B
).
System Bus
System Bus is a four-conductor cable that allows multiple 1710B modules to be
connected and communicate with each other. They can coordinate current product
selection as well as alarm signals and alarm reset (
see Theft Detection on page 4
).
