Installation Instructions
Model 1703-1 Demo Audio Player.
Installation
• Read these instructions and set the Play Mode switches for the desired demo behavior (see page 2).
• Attach the player to a fl at surface with the screws provided.
• Connect two push-buttons for track selection. Push buttons should be four-wire momentary switches, and can be
illuminated (2-5 volt LED).
• Connect 4-wire rotary control for volume control (Model1794).
• Connect power supply to AC power, then to the 1703-1 power port.
• For initial testing, connect audio output to headphones or other known audio device and test player for desired
functionality and timeout settings.
• Connect audio output(s) to the headphone amplifi er.
• Check our website for troubleshooting tips using the Status LED: audioauthority.com/product_details/1703.
ANALOG
OUTPUT 2
DIGITAL AUDIO
OUTPUT
CUSTOMER
INPUT
ANALOG
OUTPUT 1
12V DC POWER
CONTROL
PORT
STATUS
PL
AY
MODE
1
2
3
4
5
6
7
8
MODE
L 1703 DEMO
AUDIO PL
AYER
®
MEDI
A CARD
SD
/
HC
/
XC
701-16300D
PREV
NEXT
VOL 1 +
VOL 1 –
VOL 2 +
VOL 2 –
VOLUME
KNOB 1
VOLUME
KNOB 2
ON
800-322-8346 • 859-233-4599 • www.audioauthority.com
AUDIO OUTPUT 1
AUDIO OUTPUT 2
STATUS LED
12V
POWER
INPUT
Model 1703-1
1 & 2-TIMEOUT SETTINGS
BUTTON 1 BUTTON 2
7-NOT USED
4-NOT USED
5-LOUDNESS
3-NOT USED
CUSTOMER INPUT
SD CARD
1794
ROTARY CONTROL
(VOLUME KNOB)
8-NOT USED
2-WIRE
BUTTONS
4-WIRE
BUTTONS
6-NOT USED
1703 TIPS
