Audio Authority 1398E, User Manual

Page: 8 / 24

8
Wiring the System
● Switch off all devices, including monitors.
● Connect a premium certified high speed cable from the HDMI source to the
input(s) of the 1398E Cable lengths should be kept as short as possible
● Connect the outputs of the 1398E to displays or other devices.
● Make certain that the HDMI cables are securely plugged into the source and
display devices as well as the 1398E. Always use premium certified high speed
cables, and the shortest length possible, for best results
● Connect the power adapter to the AC source and then to the 1398E.
● The 1398E begins to function as soon as the AC adapter is connected to the
1398E and AC power. There is no power switch.
● Turn on the HDMI source and HDMI destination devices and observe the source
signal on the inputs of all of the destination devices
Note: Proper operation of HDMI distribution amplifiers depends on the use
of premium certified high speed HDMI cables with low loss, high bandwidth
signal handling capabilities.
Switch Settings
The 1398E can be controlled by using the front panel switches or when viewed
from the On Screen Display (OSD)
OSD FRONT PANEL
*MENU: Press to enter the On Screen
Display (OSD) menu, or to back out
from menu items
Note : Press and hold the “MENU” button
for 3 seconds while connecting the
power adapter to reset all settings to
the factory defaults.
–: Press to move down or adjust
selections within the OSD menus
Note: Pressing “MENU” and “−” together
will force Input 1 to use the internal
“FHD, 2CH” EDID.
INPUT 1: Press this button to switch to
Input 1
+: Press to move up or adjust selections
within OSD menus
Note: Pressing “MENU” and “+” together
will force Input 2 to use the internal
“FHD, 2CH” EDID.
INPUT 2: Press this button to switch to
Input 2
*ENTER: Press to confirm a selection
within the OSD or to go deeper into a
menu item
GROUP: Press this button to toggle Group
Mode on and off.
*Note: Press and hold the “MENU” and “ENTER” buttons together for 3 seconds
to lock or unlock the front panel.