PS-5 Power Supply
Owner’s Manual
______________________________________________________________________
Legal notifications
Audio Alchemy is a registered trademark of Audio Alchemy LLC.
Information in this manual is subject to change
without notice and is the sole property of Audio Alchemy. Any reproduction in whole or part without the expressed
written permission of Audio Alchemy is prohibited. No material herein may be transmitted in any way including either
electronic or mechanical methods for any purpose without expressed written permission of Audio Alchemy.
CAUTION:
NO USER SERVICEABLE PARTS INSIDE. Do not open the PS-5 chassis or remove any of its screws.
Contact Audio Alchemy or your dealer if you need service.
WARNING:
Do not expose this power supply to moisture or excessive humidity, and do not use it outdoors. Fire
hazard may result.
The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating maintenance (servicing) instructions in the literature accompanying the
appliance.
PS-5 Limited Warranty
For questions on warranty and service, visit www.audioalchemy.com. If you need more information, e-mail
[email protected]. You may also call 805.323.6005, but for faster service we recommend you e-mail.
A Few Quick Guidelines for Installation and Use
•
Do not place the PS-5 on a carpet. It can get warm during operation and some carpets can be damaged by direct contact
with warm surfaces. Place the PS-5 on a solid surface, such as a tabletop, shelf or equipment rack shelf.
•
Do not plug the PS-5 power supply into the AC wall socket until all audio connections have been made.
•
Place the PS-5 where it will not be exposed to moisture or direct sunlight.
•
Install the PS-5 where it can get some ventilation. It doesn’t produce a great deal of heat, but using it in a sealed enclosure
with no airflow could have long-term negative effects on the unit’s circuitry.
•
Use a soft microfiber cloth to clean dust and fingerprints off of the PS-5’s surface. Stubborn fingerprints or dirt may be
removed by spraying a small amount of water or window cleaner onto the cloth, then using the moistened cloth to clean the
PS-5. Do not spray any cleaner or other moisture directly onto the PS-5.
•
We recommend you leave the PS-5 powered up all the time, and use the Power buttons on the DDP-1 and/or DMP-1 to
control power for the individual components. This way, the components are always ready to play and can be powered up from
the remote controls.
•
If you do turn the PS-5 off using its front Power button, the unit will go through a 30-second power-down cycle and cannot be
reactivated during this time. If you try to power-up the PS-5 during this time, the front LED will flash indicating the unit is not
ready. Wait 30 second then hit the Power button again.
