background image

REMOTE CONTROL COMMANDER

.

1 Operating range

 

     The operating range of the remote control comm-
     ander is within a distance of about 16ft from the 
     remote control sensor on the amplifier.
     Do not point the transmitter on the front edge of the
     remote control commander to any other direction 
     than the remote control sensor of the amplifier or 
     leave an obstacle between the remote control 
     

 and  he amplifier. 

     Doing these may make remote control impossibe

commander

t

2.Loading batteries

    The battery life is about 1 year under
    normal use, but it is recommended to
    replace the batteries when their power
    seem to be weaken.
    This remote control commander accepts  
    "AAA" batteries.
    Remove the batteries if the remote control
    commander is not to be used for a long 
    period of time.

DESCRIPTIONS AND FUNCTIONS

 

KEY CONTROL BUTTONS

 

UPWARD BUTTONS(#1 to#6)

 The key can be transposed upward from the natural key up to 
 one and a half notes. (Total 6 steps

.

 Each step is 1/4 note

.

)

 

NATURAL KEY BUTTON(    )

 Press to reset to the natural key.
 

DOWNWARD BUTTONS (b1 TO b6)

 The key can be transposed downward from the natural key up to 
 one and a half notes. (

Each step is 1/4 note )

 

 

MUSIC VOLUME

 These music volume control buttons are used to raise or reduce 
 the music volume. The LED on the MUSIC VOLUME CONTROL 
 knob on the front panel of the main unit blinks during the 
 adjustment. A fine adjustment is available by pressing the button
 intermittently.
 

MIC VOLUME

 These master microphone volume control buttons are used to 
 raise or reduce the microphone volume. The LED on the MASTER 
 MIC VOLUME CONTROL knob on the front panel of the main 
 unit blinks during the adjustment. A fine adjustment is available 
 by pressing the button intermittently.

 

ECHO VOLUME

 Press one of these echo volume control buttons to raise or 
 reduce the echo volume.

Total 6 steps. 

.

3.Battery handling precautions

   Battery may explode or its fluid may leak if the batteries
   are handled in a wrong way. Take care of the following
   when handling the batteries.
      Insert batteries with correct positive (+) and
      negative(-) polarities as indicated on the set.
      Even batteries with the same shape sometimes have
      different voltages. Do not mix batteries with different
      types together.
      Do not use new and old batteries together. When
      replacing batteries, be sure to replace both of them.
      Do not heat, open or short-circuit a battery or dispose
      of it in fire.
      Some batteries are rechargeable and some are not.
      Check the indication on each battery well.

 1

Abo

ut

6ft

 

1.Push the tab 
and remove the 
battery cover.

2.Insert batteries with
correct po)and
negative(-)polarities.
"AAA" batteries X 2

3.Push the cover
close until it clicks.

Remote control 
commander

Summary of Contents for AKJ7403



















Reviews: