2 Install two AA batteries (not included) to the AWX6014U transmitter and
.
the AWR6014U receiver respectively. Make sure that the polarities of the
AA batteries are oriented as indicated in the battery compartment.
Connect the AWR6014U receiver microphone output to the microphone
input of a video recording device via the included 3.5mm audio cable. (Refer to
the "Output Connections" section on page 6 for the connection details.)
AWX6014U.The red LOW BAT LED indicator
Once the AWX6014U is turned on, the LOW BAT LED indicator will stay off
until the battery level of the installed AA batteries is below a predetermined level.
(The LOW BAT LED indicator will stay on only after the battery level of the
installed AA batteries is below the predetermined level.)
On the AWX6014U will blink once.
