Dante PCIe-R Card
CONFIDENTIAL. Copyright © 2014 Audinate Pty Ltd. All Rights Reserved.
-30-
Figure 10 - Link speed when connected to 100Mbps port/switch
How can I check whether I AM using Gigabit Ethernet?
1. The orange, right hand side Gigabit LED on the PCIe Card Ethernet port will be lit:
2. In Dante Controller, the Link Speed/s of the card (shown in the Device Info tab) will be shown as
1Gbps:
Figure 11 - Link speed when connected to 1Gbps port/switch
Computer Configuration
Refer to the 'Configuring Dante Controller' section of the
Dante Controller user guide
for more information
about configuring your computer for use with Dante networks.
Switch Configuration and Cabling
Cables are the most vulnerable part of a network system, and 'home made' manually-terminated cables
can be error prone.
If you suspect cabling issues, check for:
n
Unplugged / badly connected Ethernet cables
n
Incorrectly configured switches
n
Dante devices removed, or turned off
Symptoms of switch or cabling issues
n
You cannot see one or more devices in the Dante Controller network view
n
The Dante Controller shows orange 'unsuccessful subscription' icons, which usually means a
device that was present earlier, is now missing