AUDIMAX 362 HD, Owner'S Manual, Page: 19 / 19

Chapter 4
Chapter 4
–
–
Technical Specifications
Technical Specifications
Input
XLR3 connector, self-adjusted level
Level: -10 dBu to + 15 dBu
Z= 600 / 10 Kohms, balanced
Output
Balanced, + 4 dBu Z= 600 / 10 Kohms, with de-emphasis
MPX Output
600/10 Kohms, factory set level to
standard 4 Vpp. Differential output to cancel hum loops between
transmitter and studio ground
Frequency Response
20 - 16.000 Hz +/- 0,5 dB
measured below compression & limiter threshold
Harmonic Distortion
Below 0,02 % @ 30-15.000 Hz
Noise
Below - 90 dBA ref 100 % modulation
Stereo Separation
> 75 dBA
Subsonic Filter
Chebyshev 2nd order, 15 Hz
Asymmetry Cancelling
5:1 cancelling effect, using Khann-Bonello method
Expander
10:1 slope, 100 uS attack time
AGC (wideband)
VCA controlled, 30 dB range
Multiband Compressors
3 bands, 18 dB/octave, linear phase crossover
Compressors: 30 dB full range, 5:1 slope Automatic attack time / Release
controlled by Energy panel controls
IM Cancelled Clipper
IM attenuation > 30 dB below 250 Hz
Dynamic EQ
0 - 12 dB dynamic boost at Low, Mid and High Frequency
Processing Power
7 stages of processing devices
Power
115 V / 230 V (rear switch selected)
50/60 Hz, 20 W
Dimensions
19" rack mount. Module one (44,4 mm)
Pilot tone stability
+/- 0,002 % (+/- 0,5 Hz)
STEREO CODER SPECIFICATIONS
Measured from internal Stereo coder
jumper to MPX out
Audio input
2 Vpp for 100 % MPX output (4 Vpp)
Frequency Response
15 Khz/5 order elliptic LP filter
20-15.000 +/- 1 dB
Attenuation at 19 Khz > 50 dB
Harmonic Distortion
Less than 0,01 % THD at 1 Khz
Below 0,015 % 20-10.000 Hz
Signal to Noise Ratio
Better than 85 dBA with reference to
100% modulation
Stereo Separation
Better than 50 dB @ 20-10.000 Hz
Typical > 60 dB at 1 Khz
38, 57, 76 & 95 KHz suppression
Below - 70 dB
SOLIDYNE Audimax 362HD Page 19