Audient ASP2802, Quick Start Manual

Page: 18 / 33

Page -18- © Audient Ltd
Networking (Mac)
Your console should now be connected to your studio
DAW computer and ready for configuration as a HUI
TM
control surface and analogue automation platform.
Setting up the console with DHCP (for use with routers)
If you have more than one device connected to your DAW
computer, you will most likely be using a network router to
talk to all of these devices.
If you have connected ASP2802 to your DAW computer
via a network router, you will need to use DHCP to enable
automatic configuration of IP address, providing fast and
smarter networking.
Ensure that you
enable
DHCP in
your DAW computer
system preferences
(you should already
know how to do this
if you are running an
exisiting network).
You will most likely
be running
DHCP
with automatic IP
hand out.
Ensure that the console is set to use DHCP on the second page
of the setup menu, once set reboot the console and follow the
same
AuNet connection procedure as outlined previously
once the console is detected.