Audica CS-SERIES User Manual And Technical Specifications Download Page 4

4

GB

Read These Notes

Installation

Before

1. GENERAL INFORMATION

The AUDICA CS-Series of loudspeakers consists of
three systems; CS-System 1, CS-System 2 and CS-
System 3. If you are not sure which is your system
then refer to page 11. All systems are passive and
require the use of a 5.1 AV amplifier or 5.1
DVD/Amplifier combination. For specific information on
your amplifier or DVD player refer to your
manufacturer's manual. Please read these instructions
carefully before installing your system and pay
attention to any cautions or recommendations outlined
in this document.

2. UNPACKING YOUR SYSTEM

DO NOT UNPACK

THE SUBWOOFER WEARING THE GLOVES

Care must be taken whilst unpacking your system that
no part is damaged or lost. For an inventory of what
should be supplied with your specific system please
refer to system specifications on page 42. Gloves are
provided in the accessory pack to prevent finger prints
from being placed on the products.

as this

could cause personal injury or damage the product.
Retain packaging materials so the system can be re-
packed and shipped if necessary.

4. PRECAUTIONS

WARNING

WARNING

READ ALL INSTRUCTIONS

RETAIN INSTRUCTIONS

WATER AND MOISTURE

VENTILATION

OBJECT OR LIQUID ENTRY

HEAT

ACCESSORIES

MOVING/TRANSPORTING THE PRODUCT

- To reduce the risk of electric shock do not

remove any panels or covers. There are no user
serviceable parts in this product.

- To reduce the risk of electric shock, do not

expose this product to rain or moisture.

before attempting to

install or use the product.

for future reference.

- The product should be kept

away from water, for example sinks, bath tubs, wet
areas and alike.

- The 10" Subwoofer is provided with a

heat sink on the amplifier panel. Make sure this heat
sink is placed at least 50mm away from any wall or
piece of furniture.

- Do not insert any

object or liquid into the openings in the product as this
may cause electric shock or malfunction.

- The product should be kept away from any

heat sources such as radiators, stoves or fires.

- Several accessories are provided or

are available specifically for Audica CS-Series
products. Audica cannot hold any responsibility for the
product being damaged whilst being used with third
party accessories such as speaker stands, equipment
racks or wall brackets. Contact your dealer to find out
more about Audica's range of dedicated CS-Series
accessories.

- It is

recommended that the Subwoofer should be moved by
two people due to its weight and size. All product
should be packed in its original packaging for moving
from location to location, for example moving house.

OVERLOADING

POWER CORD PROTECTION

LIGHTNING

- Never overload mains outlets,

extension cables or multi-way plug extensions as this
may cause fire or electric shock.

- Power supply cords

must be routed away from areas where they are likely
to be walked on or squashed by furniture. Also pay
attention to the placement of extension leads or multi-
way extension leads.

- For added protection of the product

during lightning storms or extended periods of non use,
unplug your whole system from the mains outlet and
disconnect your antenna. This will protect your system
from damage due to lightning strikes and power
surges.

5. POWER SUPPLY NOTE

The Subwoofer is supplied with a power cable
terminated with a 3A mains plug. Only replace the fuse
with one of the same specification.

3. SERVICING

Do not attempt to service this product yourself as
opening covers or panels may expose you to
dangerous voltages or other hazards. Refer all
servicing to qualified personnel.

Where replacement parts are required be sure the
service technician has used replacements supplied by
the manufacturer or have the same characteristics as
the original part. Use of unsuitable parts could cause
fire, electric shock or other hazards and may void any
warranty or guarantee.

The technician must perform any safety checks to test
the performance of the product upon completion of any
repairs.

6. GUARANTEE

Audica offer a two year parts and labour warranty.

If you need to return goods for exchange or repair then
it should be returned to your dealer in its original
packaging otherwise your warranty will not be valid.

POWER SOURCE

- This product should only be

operated using the voltages marked on the Subwoofer
rear panel. If you are not sure of the details of your
home power supply then contact your dealer or local
power company.

Summary of Contents for CS-SERIES














Reviews: