background image

1

2

Smoke 

700 LED

USER´S

MANUAL

MANUAL

DE USUARIO

Warning

- The smoke machine must be placed at least 100 cm away from inflammable materials such 

as curtains, books, etc. Make sure that the housing cannot be touched by accident.

- For indoor use only.

- During installation, nobody should stand beneath the mounting area.

- Prior to the first use, have the unit checked by a qualified person.

- The unit contains voltage carrying parts. DO NOT open the smoke machine

- Never plug or unplug the unit with wet hands.

- If the plug and/or mains lead are damaged, they need to be repaired by a qualified 

technician.

- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into 

a mains outlet. It needs to be repaired by a qualified technician.

- Only connect this unit to an earthed mains outlet of 230Vac/50Hz.

- Always unplug the unit during a thunderstorm or when it is not in use.

- If the unit has not been used for a longer period of time, condensation can occur inside the 

housing. Please let the unit reach room temperature prior to use.

- When you unplug the unit from the mains always pull the plug, never the lead.

- In order to prevent dropping of the unit, a safety fastening needs to be installed. This can be 

a solid chain, a steel cable, etc. which has to be fastened separately from the mounting 

bracket.

- The supplied bracket is the main fixing and must be used to solidly mount the light effect.

- In   order   to   avoid   accidents   in   public   premises,   the   local   legal   requirements   

and   safety regulations/warnings must be fulfilled.

- Keep out of the reach of children.

Safety: 

Plug the smoke machine only in an earthed mains outlet or extension cord!

ATTENTION: the power cord can only be replaced by an original replacement.

- Be careful when filling the fluid tank. First of all, unplug the mains lead! Then unscrew the 

cap on the tank and fill it by means of a funnel.

- Only use the original smoke fluid which is environmentally friendly and, if used correctly, 

leaves no residues.

- Do not obstruct the openings on top of the case to guarantee a good ventilation. The 

heating element of the smoke machine generates heat which needs to be removed. Don’t 

put any objects on the smoke machine.

Installation and Use

Unpack the fog machine. Fill the fluid tank by means of a funnel. Plug the unit into a mains 

outlet. Thus the heating element is automatically switched on. Depending on the room 

temperature, it takes about 3 minutes until the working temperature is reached. Then the 

thermostat is clicking and the LED on the manual control lights up. Push the switch once and 

the smoke machine will produce a nice thick fog. Once the smoke machine has reached its 

working temperature (the LED is lit) the smoke machine can produce fog for a while. After this 

period of time, the fog generator is cooled so much down that the thermostat switches off. 

Wait a while until the working temperature is reached again. It is recommended to produce 

smoke with small pauses in between so that the temperature is maintained and the 

thermostat doesn’t switch off.

Make sure that there is always enough liquid smoke contained in the tank. Use of the smoke 

machine without liquid can permanently damage the unit. Once the smoke machine 

generates little smoke or pump generate another 'rattling' sound i turn off the unit direct. 

Check the fluid level and fill the tank when it is empty, check the hose and filter blockages 

and restore it. Plug in the unit and check if the problem is resolved. If problem persists, switch 

unit direct off to prevent further damage and contact your dealer.

Switching the unit off: 

Switch the unit off by unplugging it from the mains. Otherwise the 700W 

heating element will draw unnecessarily current.

Maintenance: 

Refilling the fluid reservoir should be done carefully. Remove the plug from the 

mains first! Then unscrew the cap of the reservoir and fill it by means of a suitable funnel. 

Make sure the smoke liquid to become contaminated, close the cap of the liquid smoke 

can and after filling tank right. After 40 hours, the smoke machine must be cleaned to avoid 

deposits in the machine, pump and heater. 

CLEANING: 

Run clean procedure in a well-ventilated area

- Remove smoke liquid from the tank, add cleaning solution to tank

-Switch smoke machine and wait until it is warm up

-Press the button to switch the liquid pumped through the machine

-Perform the above operation until the tank is empty

-Fill the tank with smoke liquid 

Specifications

Power supply: 230V~/50Hz

Power: 700 Watts

Heat up time: 3.5 minutes

Smoke production: ca. 75 m3/minute

Advertencia

- La máquina de humo debe colocarse a una distancia mínima de 100 cm de materiales 

inflamables como cortinas, libros, etc. Asegúrese de que la carcasa no pueda tocarse por 

accidente.

- Sólo para uso en interiores.

- Durante la instalación, nadie debe permanecer debajo del área de montaje.

- Antes del primer uso, haga revisar la unidad por una persona calificada.

- La unidad contiene piezas conductoras de tensión. NO abra la máquina de humo

- Nunca enchufe o desenchufe la unidad con las manos mojadas.

- Si el enchufe y/o el cable de alimentación están dañados, deben ser reparados por un 

técnico calificado.

- Si la unidad está dañada hasta el punto de que puede ver las piezas internas, no enchufe 

la unidad a una toma de corriente. Debe ser reparado por un técnico calificado.

- Conecte esta unidad únicamente a una toma de corriente conectada a tierra de 

230Vac/50Hz.

- Siempre desenchufe la unidad durante una tormenta eléctrica o cuando no esté en uso.

- Si la unidad no se ha utilizado durante un período de tiempo prolongado, puede 

producirse condensación dentro de la carcasa. Deje que la unidad alcance la temperatu-

ra ambiente antes de usarla.

- Cuando desenchufe el equipo de la red, tire siempre del enchufe, nunca del cable.

- Para evitar que la unidad se caiga, es necesario instalar una fijación de seguridad. Puede 

ser una cadena sólida, un cable de acero, etc., que debe sujetarse por separado del 

soporte de montaje.

- El soporte suministrado es la fijación principal y debe utilizarse para montar sólidamente el 

efecto de luz.

- Para evitar accidentes en locales públicos, se deben cumplir los requisitos legales locales y 

las normas/advertencias de seguridad.

- Mantener fuera del alcance de los niños.

Seguridad: 

¡Conecte la máquina de humo únicamente a una toma de corriente con 

conexión a tierra o a un cable prolongador!

Tank capacity: 0,4 liters 

Dims: 265 x 145 x 130mm 

Weight: 2.4 kg

Reviews: