Roma
80 Go
USER´S
MANUAL
1
2
OPERATION
Functions
1. MP3 Player
2. Volume: The first channel volume control
3. Echo: The first channel Echo volume control
4. The first channel Line/Mic Input choose
5. Input: The first channel Combo Line/Mic input
6. Volume: The second channel volume control
7. Echo: The second Echo volume control
8. The second channel Line/Mic Input choose
9. Input: The second channel Combo Line/Mic input
10. Treble: Treble volume control
11. MP3 AUX VOL:MP3 and AUX input volume control
12. USB: USB input
13. AUX input: IPOD /MP3 input
14. Bass: Bass volume control
15. Master Volume: all channel volume control
16. Mix out
17. Battery charge level indicators
18. Power switch: It allows to switch on / off the unit
19. Main supply inlet: Connect an IEC main power cable to supply the unit
SYSTEM CONFIGURATIONS
The versatile Roma 80 Go system operates in different unique modes. Use the examples
below to quick identify the best mode for your applications.
MODE
Exchange between: USB/ SD/ BLUETOOTH REMOTE CONTROL
Play/Pause
Repeat
Last
Next
TWS Stereo Link Connecting two sets by TWS stereo link
Tilt-Back (On floor)
For performance where your audience is close to you, tilt the
Roma 80 Go onto its back edge. For best results, the performer
should stand or sit to one side of the cabinet to avoid blocking
sound from the audience.
Monitor (On floor)
To use the Roma 80 Go as a professional floor monitor, place it
on the ground horizontally, in front of and pointing toward the
performer. Tilt the cabinet onto its side edge.
Stand (On speaker stand, table etc.)
Put the Roma 80 Go on a speaker stand, table or other
elevated surface for general-purpose sound reinforcement.
