Horn
10T /
Horn
20T
USER´S
MANUAL
1
2
Basic Connections
SPECIFICATION
SAFETY INSTRUCTIONS
• Make sure that the amplifier is switched off when the speaker box is
connected or disconnected.
• The box must be installed by a qualified technician who has knowledge of
the techniques.
• Do not overload the box to avoid damage to the speakers.
• Connect the box only to a good quality amplifier. Direct voltage at the
amplifier output will damage the speakers “clipping (overdrive) of the amplifier
can damage the woofer, tweeter and horn speaker.
• Do not overload the speaker to avoid damage to the components.
• Do not place an open fire (candle, etc.)on top or next to the box - FIRE
HAZARD
• For indoor use only. If the box is used outdoors, you need to make sure that
no humidity can enter the box.
• Make sure that the box is placed on a stable solid surface.
• The boxes can be stacked but do not put more than 60kg wight on the box.
• The boxes can be bung. Use only strong and approved mounting material.
The installation should only be carried out by a qualified technician who has
knowledge of the techniques and regulations regarding the mounting/
hanging of speaker box. During the mounting , make sure that nobody is
standing below the mounting area.
• Use only stands which are designed to support the weight of the speaker. Do
not attempt to place more one speaker on a stand designed for a single
speaker.
• Do not place liquids on the box and protect it against humidity, humidity can
shorten the life time considerably.
• If the unit is damaged to an extent that internal parts are visible, DO NOT
connect the unit and DO NOT switch it on.
• Never try to repair the unit yourself. It does not contain any user serviceable
parts. All repairs must be carried out by a qualified technician.
• Set the amplifier to the lowest volume prior to switching it on.
• Keep the unit out of the reach of children.
Model
Horn 10T / Horn 20T
Power Max.
10W / 20W
Transformer Taps
10-5-2.5W & 20-10-5W
Frequency Range
130Hz-17KHz & 100Hz-17KHz
SPL(@1W/1m)
90dB & 92dB
