08
FUNCTIONS
Bluetooth Pairing
When pairing Bluetooth devices, a light will flash blue and
green (4) indicating that the Bluetooth Headphones are
searching for Bluetooth devices. Locate ‘WC0837’ on the
device you are trying to connect via the Bluetooth settings to
pair the device. Upon successful connection the Bluetooth
Headphones will announce “Connected Successfully” and
the light will change to a solid blue colour.
Using the headphones with a cable
Insert the 3.5mm AUX cable (supplied) into the AUX in
Port (7), this will cause the Bluetooth Headphones to
automatically power off. The Bluetooth Headphones will now
be usable a standard pair of headphones with no drain on
the battery.
Low Battery
When the battery is low, the headphones will announce “Low
battery, please charge”, and then automatically shut down.
Charging the Headphones
Insert the small end of the charging cable into the Charging
Port (5) on the Bluetooth headphones, then plug the large
end into a powered USB port. A solid red light will appear
while the Bluetooth Headphones are charging. When the
Bluetooth Headphones are fully charged the Red light will
turn off.
Note: It is recommended to charge your Bluetooth
Headphones once a month when not in use to prevent loss
of power to the battery.
Auto Power Off
If the Bluetooth Headphones aren’t paired to a device, they
will automatically turn off after 5 minutes of inactivity in order
to save power.
