12
DISC PLAYBACK
Inserting disc and playing back
Note
Check the condition of each disc before inserting! Do not use any deformed or otherwise
damaged data carriers!
Insert single-sided discs with the printed side to the front. Check both sides of a double-
sided disc then insert it correctly into the drive.
1 Check that the portable DVD player is ready for operation or in standby mode. If not,
switch the player on.
2 When you push the disc into the opening in the DVD drive it will be drawn in
automatically. The player reads the information on the disc. On the screen will appear
DVD, VCD or CD, depending on disc type.
3 Playback normally starts automatically, the disc menu (where available) appears in the
display. If not, press
PLAY / PAUSE
at the control panel or on the remote control.
Note
When an audio disc is playing back, the screen display ends automatically if no buttons are
pressed for about 1 minute. Pressing any random button reactivates the display.
Interrupting /resuming playback
1 To interrupt the playback with freeze-frame, press
PLAY / PAUSE
once.
2 To interrupt the playback without freeze-frame, press
STOP
once (pre-stop).
3 To resume the playback press
PLAY / PAUSE
again.
With most DVDs and video CDs the playback will restart at the point at which it was
stopped. By ejecting the disc or pressing
STOP
again, this resume function is
deactivated.
