Audi RS 3 LMS SEQ, Quick Start Manual

Page: 5 / 11

5
How to warm up and cool down the car Audi RS 3 LMS
Detlef Schmidt, I/YM-1, 14.12.2016
►
Warm up (car lifted with airjack system and secured with safetys
►
Make sure main and ignition are on
►
Start the car -> see page 4
►
Shift up to the 6th gear keeping 3000 rpm and pulling shift UP-paddle
►
Heat up engine and gearbox oil with ~ 3000 rpm in sixth gear
►
Have a look at the water temperature (DDU), it should not rise above 110
°
C (if necessary put a fan in front
of the car)
►
Check that the fan behind the water radiator starts to rotate at 90
°
C
►
When gearbox temperature is ~ 50
°
C start the cool down
►
Cool down
►
Shift down from sixth gear to first gear by going off throttle, running engine in idle (do not push clutch)
►
Shift down from first gear to neutral by pushing clutch
►
Check reverse gear by pushing clutch and pressing reverse
►
Go back to neutral
►
Run the engine 2 minutes in idle speed
►
Look for error codes using DIAGRA
►
Switch off ignition, the engine stops.
►
Wait one minute and check the oil level of the engine
►
Visual check of all fluid levels
►
Inspect the engine in matter of leakages, damages, electrical and wiring problems
►
Switch of ignition and main switch