Audi A8 2019 Service Training Download Page 50

Page: 50 / 106

The Audi A8 represents the future of the luxury class in the area of vehicle electrics and electronics. Highlights of the vehicle
electrics are:

›

Matrix LED headlights (future availability).

›

Rear LED strip with tail lights incorporating
OLED technology.

›

Matrix LED reading lights.

›

Rear Seat Remote with OLED display.

›

48-volt main electrical system with mild hybrid technology.

›

All vehicles are equipped with a belt starter generator (RSG).

›

Heated armrests in the doors, front and rear center armrests
as well as a heated steering wheel.

›

14.1 kWh lithium-ion battery under the luggage
compartment floor.

Key:

Battery, 48 V

Voltage Converter, 48 V/12 V

A27

Right LED Headlamp Power Output Module 1

A31

Left LED Headlamp Power Output Module 1

J104

ABS/ESC Control Module

J136

Memory Seat/Steering Column Adjustment Control
Module

J187

Differential Lock Control Module

J234

Airbag Control Module

J245

Sunroof Control Module

J285

Instrument Cluster Control Module

J345

Towing Recognition Control Module

J386

Driver Door Control Module

J387

Front Passenger Door Control Module

J392

Rear Sunroof Control Module

J393

Comfort System Central Control Module

J428

Control Module for Adaptive Cruise Control

J500

Power Steering Control Module

J502

Tire Pressure Monitoring Control Module

J505

Windshield Defogger Control Module

J519

Vehicle Electrical System Control Module

J521

Front Passenger Memory Seat Control Module

J525

Digital Sound System Control Module

J527

Steering Column Electronics Control Module

J533

Data Bus on Board Diagnostic Interface

J605

Rear Lid Control Module

J623

Engine Control Module

J500

R242

J898

J285

J527

J136

J853

J869

J1121

J764

J519

J931

J623

J104

J1018

A31

J1088

J1122

J1089

A27

J1023

J428

J792

J234

J245

R161

J794

J521

J386

J387

Electrics and electronics

Summary of Contents for A8 2019










































































































Search results

Summary of Contents for A8 2019

Reviews:

Related manuals for A8 2019

Brands by name

Popular brands

Audi A8 2019, Service Training

Search results

Summary of Contents for A8 2019

Reviews:

Related manuals for A8 2019

Brands by name

Popular brands