– Move the retaining bracket -2- for the load guard -1- into the
installation position on the correct side by moving it in the
-direction of arrow a- and align.
– Swivel the retaining bracket -2- for the load guard -1- on the
net partition support and attach in the -direction of arrow b-.
– Hold the retaining bracket -2- as shown in this position, in
the -direction of arrow a-.
– Slightly tighten the star grip nut -3- by turning it in the
-direction of arrow b-.
– Press the retaining bracket -2- forcibly against the rubber
part of the net partition support so that the retaining bracket
-2- sits in the recess.
Note
Ensure that the retaining bracket -2- sits in the recess as
shown; -see arrow-.
– Hold the retaining bracket -2- in the final position and hand-
tighten the star grip nut -3- in the -direction of the arrow-.
Repeat this work step on the opposite side of the vehicle.
Installation instructions - Audi A4 Avant 2016
▶
Edition 01
4
3 Fitting the load guard
