Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
9 - Slide
10 - Oil strainer
❑ Inserted in chain tensioner
❑ Installation position: note locating lug on outer circumference
11 - Gasket
❑ Renew
❑ Clipped onto chain tensioner
12 - 5 Nm + turn 90° further
❑ Renew
13 - Thrust washer for drive sprocket
14 - Drive sprocket for camshaft timing chain (right-side)
Installation position: bearing mounting for drive sprocket for cam‐
shaft timing chain (right-side)
• Dowel pins in bearing mounting -3- for drive sprocket for cam‐
shaft timing chain (right-side) must engage in drillings in thrust
washer -1- and in cylinder block drillings.
2 - Drive sprocket for camshaft timing chain (right-side)
4 - Bolt, 42 Nm
Audi A8 2003 ➤
10-cylinder direct petrol injection engine (5.2 ltr. 4-valve), mechanics - Edition 10.2013
88
Rep. gr.15 - Cylinder head, valve gear
