Wearing the Headset
To wear the headset on your right ear:
1) Open the ear hook 45 from the headset..
2 Place the hook over your ear.
3 Close the ear hook against the headset.
4) Point the microphone towards your mouth for best reception.
45
1
2
3
4
5
Wearing the Headset
To wear the headset on your left ear:
1) Open the hook 90 from the headset.
2 Rotate the hook 180
3 Slide the hook towards the microphone
4) Place the hook over your left ear as with the right ear.
90
0
180
6
Switching the Headset on/off
1.
Switching on
Press and hold the multi-function button for about 6 seconds.
The green LED will flash and there will be a short tone from the speaker.
The headset is now in standby mode.
Note: The red LED will flash when the battery power is low.
2.
Switching off
Press and hold the multi-function button
for about 2 seconds The red LED
will flash and there will be
a short tone from the speaker.
The headset is now off.
6 seconds
2 seconds
7
Pairing
8
®
Bluetooth passkey
®
®
The Bluetooth passkey (or PIN ) is used to validate two Bluetooth devices to
each other and create a trusted relationship between them. It prevents the
®
unauthorized use of a Bluetooth device. The process of creating a trusted
®
relationship between two Bluetooth devices is called
“
pairing
”
.
®
Each Audex Bluetooth headset has a default passkey [1234], which is stored
in its internal memory. Whether you need to input the passkey or not during
®
pairing depends on the kind of Bluetooth device that the headset will be
connected to.
®
If you want to use the headset with a Bluetooth mobile phone or other devices
®
with built-in Bluetooth capability , you are usually required to enter the passkey
on that device during pairing.