Digiplexer 246 v2.5.x User Manual – 11/2010
Page 34
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
–
www.audemat.com
6.1.9. Support
¾
Stop / Restart
:
‘Restart’ enables the user to restart the application to reinitialize the
parameters.
“Reboot equipment”: restarts the entire unit.
“Power off equipment”: enables the unit to be switched off remotely.
L
The unit cannot be turned on remotely.
L
When the unit is turned off on this page, you must use the Reset button on the front panel to
restart it. If the unit shuts down suddenly (power shortage…), it will restart automatically.
¾
Default configuration:
This function will allow the user to delete the present configuration and to reset the default
configuration.
Caution: all parameters as well as scripts and log files will be deleted.
L
Resetting will not erase your current IP address.
¾
Event Log:
You may clear the event logs, which can be viewed from the application (‘Status’ button, ‘Event log’
tab, see section 10.2). Otherwise, data is kept until 30 000 events have been recorded.
