ITEM: AOCURIO
3
Quick Start Guide
3.1
Charging & Powering ON
Connect the Micro USB cable (only use the provided cable) to a
computer USB port or a USB wall charger. Plug the other end of the
micro USB cable into the Micro USB charging port (G) located on the
left side of the headphone. While charging the LED indicator light (E)
will turn RED and then turn BLUE when the battery is fully charged.
Ensure the Headphones are turned off, then press and hold the Power
button (A) for 2-3 seconds to turn the Headphones ON. The
Headphones will enter Bluetooth pairing mode automatically and emit
a tone as the LED indicator light (E) will flash BLUE and RED.
NOTE: please refer to the diagram on 2.2
1
2
1
1
2
2-3s
