7
Rotatable logo
Depending on the mounting direction of the loudspeaker (either horzontally or vertically),
the logo on the front grill of the loudspeaker that is held in place by a spring loaded
mechanism can be rotated into the direction the speaker is mounted.
By placing a flat object between the logo and the recessed surface in the grill and the
logo, the logo will move forward because of the spring loaded mechanism and can be
rotated into the right position.
Connecting
For connecting the XENO loudspeaker, the wires coming
from the amplifier have to be connected to the 4-pin
Terminal Block connector at the back of the unit. The
wires coming from the amplifier have to be connected to
the ‘In +’ and ‘In -’ terminals. The other two terminals
‘Out +’ and ‘Out -’ can be used for linking the signal
coming from the amplifier to other loudspeakers,
resulting in a parallel network of multiple loudspeakers.
Mind the polarity markings when wiring the loudspeaker cables.
AUDAC
XENO 6
Impedance : 8 Ohm
Power Handling: 80 W att
Se
rial
n
o
In
+
In
-
Ou
t +
Ou
t -
www.
AUDAC
.eu
Summary of Contents for XENO 6
Page 1: ...XENO 6 User Installation Manual www audac eu ...
Page 2: ...2 ...
