3
Instructions
Mounting and connecting
Step 1:
Make sure the M2/R2 power inlet is disconnected from the mains
power.
Step 2:
Open the M2/R2 housing by carefully removing the screws from the top panel of the
device.
Step 3:
Remove the Powersupply.
In case the unit has a powersupply mounted on a fixing plate, u better remove the
complete unit by removing the 4 screws from the bottom. Is the power supply not
mounted on a fixing plate, it is sufficient to remove the 5 screws from de L-shaped
PCA.
Fixing Plate
L-shaped PCA
