MBK1xxV installation guide
2
Dimensions:
REQUIREMENTS REGARDING INSTALLATION, SUSPENSION
AND CONNECTION OF THIS LOUDSPEAKER. EVEN WHEN
OTHERWISE SPECIFIED IN THIS DOCUMENT.
•
IT’S THE INSTALLERS RESPONSIBILIT Y TO ENSURE
INSTALLATION OF THE LOUDSPEAKERS AND MOUNTING
SYSTEMS IS PERFORMED IN ACCORDANCE WITH ALL
APPLICABLE CODES
•
UNSAFE MOUNTING OR OVERHEAD SUSPENSION ON ANY
HEAVY LOAD CAN RESULT IN SERIOUS INJURY OR DEATH, AND
PROPERTY DAMAGE. IT’S THE INSTALLERS RESPONSIBILITY TO
EVALUATE THE RELIABILITY OF ANY MOUNTING METHOD USED
FOR THEIR APPLICATIONS
•
THE INSTALLATION OF THIS LOUDSPEAKER SHALL BE DONE
BY QUALIFIED PERSONNEL ONLY.
•
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER
THROW THEM AWAY
•
ALWAYS HANDLE THIS UNIT WITH CARE
•
CLEAN ONLY WITH DRY CLOTH
•
HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS
•
NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY
DRIPPING OR SPLASHING LIQUID.
•
DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH
LEVEL OF DUST, HEAT, MOISTURE OR VIBRATION
•
DO NOT USE HYDROCARBON BASED SOLVENTS, LUBRICANTS
OR CLEANING AGENTS OF ANY TYPE ON OR AROUND
THE DEVICE AND MOUNTING HARDWARE DURING THE
INSTALLATION. THE USE OF THESE PRODUCTS ON OR
AROUND THE MOUNTING ANCHORS AND SCREWS CAN
LEAD TO DEGRADATION OF THE PLASTIC MATERIAL, POSSIBLY
RESULTING IN CRACKING AND PREMATURE FAILURE OF THE
PRODUCT.
•
THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT
USE IT OUTDOORS
•
ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE
MANUFACTURER.
•
ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN
STRUCTURALLY SUPPORT THE WEIGHT OF THE SPEAKER.
IGNORING THIS CAN BRING THE SPEAKER DOWN.
•
DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO
MOUNT THE SPEAKER. IF EXTREME FORCE IS APPLIED TO THE
SPEAKER, IT COULD FALL DOWN
•
ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED
HIGH UP. ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND
METHODS
•
CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING.
•
IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT
ITSELF, INFORM YOUR VENDOR IMMEDIATELY.
•
ALWAYS FOLLOW THE LOCAL REGUL ATIONS AND
PRECAUTIONS
This product contains no user serviceable parts. Refer all
servicing to qualified service personnel. Do not perform any
servicing (unless you are qualified to do so).
CAUTION - SERVICING
This product conforms to all the essential requirements and
further relevant specifications described in following directives:
2011/65/EU (RoHS2) and 1907/2006 (REACH)
EC DECLARATION OF CONFORMITY
•
DO NOT MAKE UNAUTHORIZED ALTERATIONS TO THE
PRODUCT.
•
The MBK110V mounting bracket is for the use with VEXO110(A)
only.
•
The MBK112V mounting bracket is for the use with VEXO112(A)
only.
•
The MBK115V mounting bracket is for the use with VEXO115(A)
only.
B
C
A
A
A
D
E
F
G
H
MBK110V
MBK112V
MBK115V
A
566 mm
636 mm
716 mm
B
83.5 mm
81mm
75 mm
C
345 mm
390 mm
450 mm
D
330 mm
370 mm
428 mm
E
566 mm
636 mm
716 mm
F
125 mm
140 mm
160 mm
G
30 mm
35 mm
35 mm
H
90 mm
90 mm
100 mm
