AUDAC KYRA24, User & Installation Manual

Page: 7 / 12

7
30
75
75
75
75
40
30
56
33
6
8
5
5
10
Once both speaker part and wall part are safely attached to their positions, the protective
finishing cover can be assembled over the wall plate by clicking it. Afterwards the speaker
can be assembled to the wall bracket by bringing both parts together and tightening them
through the button head bolt and nuts together through an hex drive key. The upper one
can be used for adjusting the tilt-angle of the speaker.
6,5
°
42
°
Once installed, the speaker can be can be panned and tilted, focussing the loudspeaker
into the desired listening direction. This is useful when the installation height on the wall
is limited or the speaker is mounted from the side. Depending on the selected speaker
part, the downward tilting angle can be adjusted within a range of 0° and 6.5°, or within
a range of 6.5° and 13°. The maximum pan in both directions is 42°.