background image

4

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

•  ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER 

THROW THEM AWAY

•  ALWAYS HANDLE THIS UNIT WITH CARE

•  CLEAN ONLY WITH DRY CLOTH

•  HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

•  NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR 

SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON 
TOP OF THIS DEVICE

•  DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS 

OR OTHER APPARATUS THAT PRODUCE HEAT

•  DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST, 

HEAT, MOISTURE OR VIBRATION

•  THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

•  ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE 

MANUFACTURER.

•  ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY 

SUPPORT THE WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE 
SPEAKER DOWN.

•  DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE 

SPEAKER. IF EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL 
DOWN

•  ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP.  

ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS

•  CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING. 

IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF, 
INFORM YOUR VENDOR IMMEDIATELY.

Summary of Contents for KYRA12/O Series













Reviews: