AUDAC IME01, User Manual

Page: 19 / 24

19
Using the coaxial socket
The coaxial socket allows connection of the sound
bar to the coaxial output of your TV or receiver.
Simply connect using a 75 Ohm coaxial cable.
Using the AUX socket
The AUX socket allows connection of the sound bar
to any device with an unbalanced stereo line output,
such as TV, computer, laptop, smartphone, tablet, ...
Depending of the output of the connected device
3.5 mm jack (A) or RCA (B), the appropriate cable
shall be used.
Using Bluetooth
The first time when your Bluetooth portable device is connected (smartphone, tablet, ...
) it needs to get paired. For getting it paired, the sound bar shall be switched ON and in
Bluetooth mode. This can be done using the power button on the side of the unit, or the
remote control. When in Bluetooth mode, the blue LED behind the front grill will blink.
Activate the Bluetooth mode in your portable device and search for devices. The device
name ‘AUDAC IMEO1’ will appear on your Bluetooth device list. If the device can’t be
found, press and hold the
button on the remote control to be discoverable.
The system will enter in pairing mode and ‘Pairing’ will be heard through the speakers.
The Bluetooth indicator (blue LED) will blink fast.
Select ‘AUDAC IMEO1’ from the device list and ‘Paired’ will be heard through the speakers.
The Bluetooth indicator (blue LED) will illuminate constantly.
Disconnecting the Bluetooth function can be done by switching to another function (input)
on the unit, disabling the Bluetooth from your portable device, or pressing and holding
the
button on the remote control.
SE RV ICE ON LY
HDMI AR C
OPTICAL COAXIAL AUX
SE RV ICE ON LY
HDMI AR C
OPTICAL COAXIAL AUX
SE RV ICE ON LY
HDMI AR C
OPTICAL COAXIAL AUX
A
B
SE RV ICE ON LY
HDMI AR C
OPTICAL COAXIAL AUX