AUDAC DPA616, User Manual

Page: 14 / 16

14
Chapter 4
Additional information
Technical specifications
Output Power Stereo @ 4 Ohm 16 x 60 Watt
(1 kHz, THD 1%)
Stereo @ 8 Ohm 16 x 30 Watt
Bridge @ 8 Ohm 8 x 120 Watt
Frequency response
20 Hz - 20 kHz
Signal to Noise Ratio > 100 dB
Total Harmonic Dist Noise < 0.1%
Damping factor
(8 Ohm)
110
Common Mode Rejection > 65 dB
Crosstalk Paired channels > 65 dB
Unpaired channels > 110 dB
Inputs Type 8 x Stereo Balanced Line (16 Ch)
Sensitivity -20 dB ~ +20 dB
Impedance 20 k Ohm
Connectors 3-pin Terminal block - 3.81 mm
Outputs Type 8 x Stereo Loudspeaker (16 Ch)
Connectors 4-pin Terminal block - 5.08 mm
Controls Gain
Stereo / Bridge & Parallel switch
Indicators Power
Clip (rear)
Protection DC-Short circuit
Over heating
Over load
Cooling system Temperature controlled fan
Amplifier technology Class-D
Power supply Type Switching mode
Range 100-240 V AC / 50-60 Hz
Power consumption Idle 47 Watt
1/8 Rated power 200 Watt
1/3 Rated power 400 Watt
Weight 8.2 Kg
Dimensions (W x H x D) 482 x 88 x 322 mm
Unit height 2HE