background image

5

CAUTION

•  USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER

•  USE CABLES WITH CLEAR COLOUR CODING INDICATING THE POLARITY AND 

MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.

•  ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE. 

EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES. 

AVOID EXPLOSIONS:

 DO NOT USE THE SPEAKER AROUND GASOLINE, 

THINNER OR OTHER COMBUSTIBLES

•  AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING 

THE LOUDSPEAKER

•  DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT 

DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.

 

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing 
to qualified service personnel. Do not perform any servicing 
(unless you are qualified to do so.)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and 
further relevant specifications described in following directives:  
2004/108/EC (EMC) and  2006/95/EC (LVD)

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be 
disposed with regular houshold waste at the end of its product 
life. This regulation is created to protect both the environment 
and human health. 

This product is developed and manufactured with high quality 
materials and components which can be recycled and/or reused. 
Please dispose this product to your local collection point or 
recycling centre for electrical and electronic waste. This will 
make to sure that it will be recycled on an environmentally friendly 
manner, and will help to protect the environment in which we all 
live. 

Summary of Contents for CELO8









Reviews: