AUDAC BMP40, User Manual

Page: 12 / 16

12
Output gain
0dB
Connected
Paired
Info
Factory reset
BMP40 SETTINGS
Settings screen
The settings menu for BMP40 can be loaded by pressing the rotary selection dial.
Output gain:
The gain can be adjusted within a range of +8
dB and -82 dB, allowing optimization of the
output level according to the input sensitivity of
the connected amplifier or pre-amplifier. For
adjusting the output gain, rotate the function
dial until ‘Gain’ is highlighted and press it for
proceeding to the gain settings. The level can
be adjusted by rotating clockwise (tuning up)
or counter-clockwise (tuning down). Press the
rotary dial for confirming the currently set output
level.
Connected:
Information about the connected transmitting device is shown when highlighted
‘Connected’. This menu includes the device name and Mac address. Press the rotary
selection dial twice for disconnecting the currently connected device.
Paired:
8 device ID’s of recently paired transmitters are stored as authorized devices and shown
in this list. These authorized devices are allowed for direct pairing with the BMP40 without
making it discoverable. (without pressing the button in the main module screen)
Devices can be removed from this list by pressing the rotary dial when highlighted
‘Paired’, allowing browsing through the list. Select the device and press the rotary dial
again to remove it from the pairing list. (Select OK to remove, or cancel to keep it)
Info:
Gives an overview of the BMP40 Mac address and running software versions.
Factory reset:
Factory reset will recall all settings to factory defaults and all previously made settings
and configurations will be lost. After selecting factory reset, a confirmation will be asked
whether all settings definitely need to be reset to factory defaults. When confirmed, all
settings will be lost.
Back:
Returning to the player mode screen is done by selecting ‘Back’.