8
Step 3: Attach the speaker
After the bracket is mounted and the connections have been made, the speaker shall be
attached. Attaching is simply done by inserting the male 6.3 mm plug from the bracket
into the female counterpart on the rear side of the loudspeaker. Once inserted, the
speaker shall be pressed on the male part until the connections are clicked in position.
Now the speaker is safely fixated and connected.
Step 4: Position the loudspeaker
The last step in the installation procedure of the speaker is pointing it into the correct
direction. The ball joint mechanism allows adjustment of the direction of the loudspeaker
without requiring any tools.
Carefully point the speaker into the correct direction and it will automatically remain in
this position.
Summary of Contents for ATEO2S
Page 1: ...ATEO2S User Installation manual www audac eu ...
Page 2: ...2 ...
