AUDAC Ateo 2 User & Installation Manual Download Page 4

4

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

• 

ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER THROW THEM 
AWAY

• 

ALWAYS HANDLE THIS UNIT WITH CARE

• 

CLEAN ONLY WITH DRY CLOTH

• 

HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

• 

NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING 
LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP OF THIS DEVICE

• 

DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR 
OTHER APPARATUS THAT PRODUCE HEAT

• 

DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST, HEAT, 
MOISTURE OR VIBRATION

• 

THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

• 

ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER.

• 

ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY SUPPORT THE 
WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE SPEAKER DOWN.

• 

DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE SPEAKER. IF 
EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL DOWN

• 

ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP.  
ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS

• 

CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING. 
IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF, INFORM YOUR 
VENDOR IMMEDIATELY.

• 

ALWAYS FOLLOW THE LOCAL REGULATIONS AND REQUIREMENTS REGARDING 
INSTALLATION, SUSPENSION AND CONNECTION OF THIS LOUDSPEAKER. EVEN WHEN 
OTHERWISE SPECIFIED IN THIS DOCUMENT.

• 

THE INSTALLATION OF THIS LOUDSPEAKER SHALL BE DONE BY QUALIFIED 
PERSONNEL ONLY.

Summary of Contents for Ateo 2













Reviews: