3
After the outer jacket is removed, the steel core needs to be terminated
by a loop, making it possible to hang the steel cable core to the safety
hook. The termination of the steel core should be done with the included
screw cable clamp. Just insert the steel core through one side of it and
return it though the other side. After this is done, tighten the screw from
the cable clamp.
Then, the loudspeaker can be suspended from the mounting point which
is provided at the desired ceiling location. In order to ensure a secure
mounting for the loudspeaker, it is recommended to provide an eye-bolt
at this location.
The fixing of the loudspeaker should be done by hanging the included
safety hook to the provided eye-bolt.
After the loudspeaker is hung, the steel cable should be attached to the
safety hook.
When all these steps are completed, the loudspeaker is properly fixed to
the ceiling meeting all the strongest safety regulations.
When the connections of the loudspeaker are made according to the
instructions described below, the cover can just be slided over the
connection and fixing parts.
Connecting
Following on this, the loudspeaker connections should be made. Depending
of the desired power tap, the corresponding wires of the 5-core connection
cable should be connected.
The connection cable colouring is:
COM
-
Black
20 Watt / 500 Ohm
-
Red
10 Watt / 1000 Ohm
-
Yellow
5 Watt / 2000 Ohm
-
Blue
2.5 Watt / 4000 Ohm
-
Green
The black core always needs to be connected to the COM amplifier
terminal while the other connected core should be selected according to
the desired power.
