AUDAC AMP20, User Manual

Page: 16 / 20

16
Chapter 4
Technical specifications
Inputs Type Stereo Balanced Line
Connectors 2 x 3-pins Euro Terminal Block ~ 3.81 mm
Impedance 20 k Ohm
Sensitivity - 12 dBV ~ +10 dBV
Type
Balanced Microphone
Connectors 3-pins Euro Terminal Block ~ 3.81 mm
Impedance 47 k Ohm
Sensitivity - 34 dBV ~ -18 dBV
Output Type Stereo Loudspeaker Output
Connectors 4-pins Euro Terminal Block ~ 5.08 mm
Impedance Min Load of 4 Ohm
Power 2 x 7.5 Watt @ 8 Ohm Stereo
2 x 15 Watt @ 4 Ohm Stereo
1 x 30 Watt @ 8 Ohm Bridge
THD+N < 0.1 %
Crosstalk - 75 dB
Signal / Noise ratio > 95 dB
Power consumption Standby 0.8 Watt
Nominal
(1/8 MUP)
5.3 Watt
Absolute Max 35 Watt
Efficiency 1/8 MUP 70%
MUP 87%
Cooling Passive
Protection Over-Heat
Short circuit
Limiter
Auto Power Down Minimum signal -46 dB
Timing Max 90 Seconds