Auctus GD90, User Manual

Page: 22 / 28

20
Note: Changing the channel will cover the leader's frequency setting
include contact, color code or tone code settings.
1. Configure the programmable key as a “GoGrouping” through the
programmable software.
2. A group of radios in mutual communication, one or more sets to
operate the temporary teaming function: press the programmable
button preset as “GoGrouping” to enter the frequency allocation
mode, and the indicator flashes green.
3. One of the radio can temporarily act as the group leader: In the
frequency allocation mode, press the programmable key preset as
“GoGrouping”
again to send signal and the indicator flashes red.
4. Other radios that enter the “GoGrouping” mode receive signaling
When the indicator lights of the transmitter and receiver stop
flashing and emit a prompt tone, the frequency allocation is
completed and a temporary talk group is formed. Members can talk
to each other without switching the frequency.
Note:
·
The radio that enters the “GoGrouping” mode will automatically exit
the frequency allocation mode if there is no operation for 2 minutes.
·
After the frequency allocation is successful, any member will exit
the “GoGrouping” mode after switching channel.
Remote Kill (Private call only)
In the case that the radio is lost or in other situations, to prevent the
other party from using the radio, you can send the "Kill" command to
make the radio unusable.
1. The "Kill" can be sent in "Push-to-talk" mode as set with the
programming software.
2. After the "Kill" command is sent successfully, an OK prompt will be
issued; otherwise, an error prompt will be given.
3. The operation with buttons except power on/off can only be restored
功能介绍
Features