CAUTION STATEMENTS
2.
Caution Statements
Caution Statements cannot cover every potential cause of equipment damage but
can highlight common causes of damage. It is the installer's responsibility to read
and understand all instructions in this manual prior to installing, operating or
maintaining the equipment, to follow good electrical practice including applying
appropriate personal protective equipment and to seek advice before operating this
equipment in a manner other than as described in this manual.
NOTE
The EMX4e is not user serviceable. The unit should only be serviced by
authorised service personnel. Unauthorised tampering with the unit will
void the product warranty.
FOR YOUR SAFETY
•
The STOP function of the soft starter does not isolate dangerous
voltages from the output of the starter. The soft starter must be
disconnected by an approved electrical isolation device before accessing
electrical connections.
•
Soft starter protection features apply to motor protection only. It is the
user’s responsibility to ensure safety of personnel operating machinery.
•
The soft starter is a component designed for integration within an
electrical system; it is therefore the responsibility of the system
designer/user to ensure the system is safe and designed to comply with
relevant local safety standards.
2.1
Electrical shock risk
WARNING – ELECTRICAL SHOCK HAZARD
The voltages present in the following locations can cause severe electric
shock and may be lethal:
•
AC supply cables and connections
•
Output cables and connections
•
Many internal parts of the starter
SHORT CIRCUIT
The EMX4e is not short circuit proof. After severe overload or short circuit,
the operation of the EMX4e should be fully tested by an authorised service
agent.
EMX4e User Manual (710-18433-00C) |
3
