1.8 B
ATTERY INSTALLATION
When you first install the batteries in the TH141, the unit runs a sequence
of tests and a complete reset to zero, which last approximately 5
seconds. The screen should display the time and the day, as well as
the current temperature as follows:
It is normal for the displayed temperature to be higher than the room
temperature if your are holding the TH141 in your hands, It will return
to normal about one hour after installation on the wall.
Mount the thermostat on the wall plate and screw it in place.
Even if the thermostat indicates that the batteries are good, it is recommended
to replace them once a year, at the beginning of the cold season.
12
2. ENTRY OF BASIC DATA
You may program the thermostat while holding it in your hands or once it is mounted
on the wall.
2.1 P
ROGRAMMING THE TIME AND DAY
1. Set the time using the Hour and Minute buttons.
2. Set the date using the Day button.
2.2 P
ROGRAMMING THE COMFORT
,
ECONOMIC AND VACATION SETTINGS
The Comfort
, Economic
and Vacation
settings respectively represent the
temperatures that you wish to have during the day
, at night
or while you are
away at work
, or while you are away for an extended period
. Since your
thermostat controls both heating and air-conditioning, and since the economic
settings are the opposite in both cases (reduction for heating temperature, increase
for air-conditioning), you must program the settings for heating and then for
air-conditioning.
13
1. To program your heating settings
a) Set your thermostat to the heating mode using the Heat/Cool button.
b) To program the Comfort temperature, select the desired degree using the
buttons and press the button
until the
icon is displayed (app. 3 seconds).
c) To program the Economic temperature, select the desired degree using the
buttons and press the
button until the the
icon is displayed
(app. 3 seconds).
d) To program the Vacation temperature, select the desired degree using the
buttons and press on the
button until the
icon is displayed (app.
3 seconds). This setting is used by the telephone remote control.
e) Press the Manual/Auto button to exit this function and return to the normal
operating mode.
2.3 P
ROGRAM THE AIR
-
CONDITIONING SETTINGS
Set your thermostat to the air-conditioning mode
using the Heat/Cool button and
repeat operations b) to e).
14
3. OPERATING MODES
The TH141 offers two operating modes.
3.1 M
ANUAL
( )
This mode allows you to maintain a constant temperature in the house.
1. To activate this mode, press the Manual/Auto button to display the icon.
2. Set the desired temperature using the
buttons or select the pre-programmed
, or settings.
3.2 AUTO
MATIC
( )
This mode executes your own programming. To activate this mode, press the
Manual/Auto button to display the
icon. The
or
icon indicates that the pro-
gram setting is active.
3.2.1 S
CHEDULE PROGRAMMING
The TH141 allows 4 setting changes for each day of the week. There are no pre-set
programs. The programs are tailored to perfectly adapt to your life style.
The principle is very simple. For each day, enter the time at which you wake up (P1),
the time you leave for work (P2), the time you arrive back home (P3) and the time you
go to bed (P4).
15
