Activating Speed Wi-Fi NEXT setting tool
Make the product settings from Speed Wi-Fi NEXT setting tool on a web browser of a PC
connected with the product via wireless LAN (Wi-Fi
®
) or using USB3.0TypeC-A cable (sample).
Steps for wireless LAN (Wi-Fi
®
) connection are explained here as example.
* Use “SSID1” to use Speed Wi-Fi NEXT setting tool via wireless LAN (Wi-Fi
®
) connection.
*
To log in, operate during the unlock screen is displayed or the screen is turned off on the
product.
Press the power button for over approximately three seconds to turn the
power on
Activate a wireless LAN (Wi-Fi
®
) device and connect to the product via
wireless LAN (Wi-Fi
®
)
Activate the web browser and enter
“http://speedwifi-next.home” in the URL
entry field
The log-in screen appears.
Enter “admin” in the user name and
password then select “Login”
•
Default login password for Speed Wi-Fi NEXT setting
tool is the last five digits of IMEI shown on the bottom
of the back side of the product.
•
When you select "Login", the confirmation screen of "The strength of your login password is too
low. Please change the password to avoid potential security issues." appears.
When "Change Now" is selected in the confirmation screen, the password change screen
appears to change it soon. After change of password, log in from the log-in screen again.
When "Later" is selected in the confirmation screen, your log-in is done and the setting screen of
Speed Wi-Fi NEXT settings tool appears.
•
Select “English” from
言語
(Language) list.
When you log in to Speed Wi-Fi NEXT setting tool successfully, Speed Wi-Fi NEXT setting tool
Settings/Connection screen appears.
December 2016, 1st Edition
Sold by: KDDI CORPORATION, OKINAWA CELLULAR
TELEPHONE COMPANY
Imported by: HUAWEI Technologies Japan K.K.
Manufactured by: HUAWEI TECHNOLOGIES CO., LTD.
Connecting with WPS compatible wireless LAN (Wi-Fi
®
) devices
If your wireless LAN (Wi-Fi
®
) device is compatible with WPS function, the wireless LAN (Wi-Fi
®
)
device can be connected with simple steps by using WPS setting of Easy settings.
From the Home screen, tap “Easy settings”
“Next”
→
“WPS setting”
→
“WPS”
WPS function is enabled.
Within approximately two minutes, operate WPS connection on the wireless
LAN (Wi-Fi
®
) device
When the setting is succeeded, “Wi-Fi connect success.”, etc. is displayed on the product
screen for a short while. And the number of the counter for connected wireless LAN (Wi-Fi
®
)
devices on the Home screen increases one.
•
Operations vary by wireless LAN (Wi-Fi
®
) device.
Connecting with a smartphone via wireless LAN (Wi-Fi
®
) using NFC function
NFC is a convenient function with which a network name (SSID) and security key (password)
can be scanned. Hold a NFC-compatible smartphone (Android OS device) over the product to
connect.
* Be careful that NFC may be detected accidentally if you carry the product gathering up a
smartphone with the NFC function ON.
■
Connecting by holding over a NFC detection area
Hold your smartphone over the product to set up connection.
Press the power button for over approximately three seconds to power on
Hold the NFC mark of smartphone over the NFC scanning area of the product
When the wireless LAN (Wi-Fi
®
) signal icon is displayed on the screen of smartphone,
the setting is complete.
Related accessories
Accessories for charging and connecting with a PC, etc. are as follow.
・
TypeC Common AC Adapter 01 (0601PQA) (sold separately)
Common AC Adapter 05 (0501PWA) (sold separately)*
Common AC Adapter 03 (0301PQA) (sold separately)*
Common AC Adapter 03 Navy (0301PBA) (sold separately)*
Common AC Adapter 03 Green (0301PGA) (sold separately)*
Common AC Adapter 03 Pink (0301PPA) (sold separately)*
Common AC Adapter 03 Blue (0301PLA) (sold separately)*
・
MicroB-TypeC Adapter (0601PHA) (sold separately)
・
W04 Cradle (HWD35PUA) (sold separately)
*: To use, MicroB-TypeC Adapter (sold separately) is needed.
◎
Accessories on this page can be purchased from au online shop.
http://auonlineshop.kddi.com
Connecting with a smartphone using QR code display function
Install “Huawei HiLink” app on a smartphone (Android device) which enables auto-connection
with the product by scanning QR code displayed on the product.
*iPhone (iOS device) does not support this feature.
■
Installing “Huawei HiLink” app
To connect with a smartphone using the QR code display function of the product, install
“Huawei HiLink” app on the smartphone in advance.
From the Home screen of the product, tap “About”
→
“QR code”
QR code for connection appears.
Slide the screen up, then tap “Android QR code”
QR code for downloading “Huawei HiLink” app appears.
With QR code scan app on a smartphone, scan the Android QR code
•
Follow the QR code scan app's instructions, connect to scanned URL.
Tap “INSTALL”
•
Confirm that “Huawei HiLink” app is downloaded.
* You can search and download “Huawei HiLink” app on Google Play
TM
instead of scanning
QR code.
■
Scanning QR code and connecting with a smartphone
From the Home screen of the product, tap “About”
→
“QR code”
QR code for connection appears.
From the application list on a smartphone, tap “Huawei HiLink”
The device selection screen appears.
•
When activating for the first time, “Huawei HiLink” app introduction appears. Follow the onscreen
instructions.
•
Turn on wireless LAN (Wi-Fi
®
) function on a smartphone in advance.
Tap “3G/4G wireless routers”
→
“Later”
Huawei HiLink home screen appears.
Slide/flick the menu at the bottom of the screen left and then tap “Scan”
A QR code scanning screen appears.
Scan the QR code displayed on the product screen
When a wireless LAN (Wi-Fi
®
) signal icon is displayed on the screen of the smartphone,
the setting is complete.
* Automatic connection cannot be made by using an app other than “Huawei HiLink”. Always
use “Huawei HiLink” app.
* If auto-connection is failed by scanning QR code, see “Connecting with wireless LAN (Wi-Fi
®
)
using Easy settings”.
* For more information about “Huawei HiLink”, contact developer of the app or the following
webpage.
http://consumer.huawei.com/en/support/index.htm
Troubleshooting
Please check the following if problems such as being unable to connect to the Internet
from a PC remain even after setting and reading this manual and “
取扱説明書 詳細版
(Full
Instruction Manual)” (Japanese).
* Signal strength, communication congestion, amount of contents may affect communication
status.
■
Internet connection fails.
1. Check that you are inside the service area.
2.
Signal reception may be poor. Try again in a place with better reception.
3.
Access point can get busy at certain time. Wait a while and try again.
4.
Activate Speed Wi-Fi NEXT setting tool and make sure that the product connects to
the Internet correctly.
■
Communication stops intermittently.
1. Signal reception may be poor. Check in a good reception area.
2.
Check the battery level. If the battery level is low, charge and connect again.
3.
Make sure that the product and a PC are correctly connected via wireless LAN (Wi-Fi
®
),
Bluetooth
®
or USB3.0TypeC-A cable (sample).
4.
If the product and wireless LAN (Wi-Fi
®
) device is connected via wireless LAN (Wi-Fi
®
),
turn off the product and turn it on again.
5.
When you have connected the product and Bluetooth
®
device via Bluetooth
®
, reboot
the product.
6.
If the product and a PC are connected via the USB3.0TypeC-A cable (sample),
reboot the product.
If connection is not established after the above-mentioned steps are performed,
disconnect the product from the PC, reboot the PC and then connect the product
again.
■
Communication speed is slow.
1. Signal reception may be poor. Check in a good reception area.
2. Access point may be congested. Wait a while and try again.
Connecting with wireless LAN (Wi-Fi
®
) using Easy settings
Use manual setting of Easy settings function to connect with wireless LAN (Wi-Fi
®
) following
onscreen instructions.
* Connection is established using the product “SSID1 (WPA2/WPA)”.
In this manual, connecting methods with the following wireless LAN (Wi-Fi
®
) devices are
explained.
•
Windows PC
•
Mac
•
Nintendo 3DS LL/3DS/DSi LL/DSi
•
Smartphone
•
iPhone/iPod touch/iPad/iPad mini
* Set up to establish wireless LAN (Wi-Fi
®
) connection when the product is connected to
wireless LAN (Wi-Fi
®
) devices for the first time. Once you set up connection with wireless LAN
(Wi-Fi
®
) devices, connections resume automatically from the second time on (when you set
“Connect automatically” or “Save the setting” on each wireless LAN (Wi-Fi
®
) device).
From the Home screen, tap “Easy settings”
•
When you power on the product for the first time, “
本製品へようこそ！
(Welcome!)” screen appears. To change the language to English, refer
to “Switching to English display” in this manual.
Tap “Next”
→
“Manual setting”
The Manual setting screen appears, and SSID of the
product and the security key (password) are displayed.
Turn on wireless LAN (Wi-Fi
®
) function on a wireless LAN (Wi-Fi
®
) device
•
For more detailed operations or information, refer to each wireless LAN (Wi-Fi
®
) device manual etc.
■
For Windows 10
From “
スタート
(Start)” menu, “
設定
(Settings)”
→
“
ネットワークとインターネット
(Network
& Internet)” to turn on Wi-Fi
■
For Windows 8.1
Swipe from the right end of desktop screen (for mouse operation, point at the upper right
of the screen), “
設定
(Settings)”
→
Select the Wi-Fi icon
→
Turn on Wi-Fi
■
For Windows 8
Swipe from the right end of desktop screen (for mouse operation, point at the upper right
of the screen), “
設定
(Settings)”
→
“PC
設定の変更
(Change PC settings)”
→
“
ワイヤレス
(Wireless)”
→
Turn on a wireless device
■
For Windows 7
From the “
スタート
(Start)” menu, select “
コントロールパネル
(Control Panel)”, then select
“
ネットワークとインターネット
(Network and Internet)”
→
“
ネットワークと共有センター
(Network and Sharing Center)”
→
“
ネットワークに接続
(Connect to a network)”
■
For Mac
From the Apple menu, “System preferences...”
→
“Network”
→
“Wi-Fi”
→
“Turn Wi-Fi On”
■
Nintendo 3DS LL/3DS
From the menu screen, “
本体設定
(Settings)”
→
“
はじめる
(Start)”
→
“
インターネット設定
(Internet settings)”
→
“
インターネット接続設定
(Internet connection setting)”
→
“
接続先の
登録
(Saving access point)”
→
“
自分で設定する
(Set manually)”
→
“
アクセスポイントを検
索
(Search access points)”
■
For Nintendo DSi LL/DSi
From the menu screen, “
本体設定
(Settings)”
→
“
インターネット
(Internet)”
→
“
接続設定
(Connection settings)”
→
Select any one of “
未設定
(Not set)”.
■
For smartphone (Android OS device)
From the menu, “Settings”
→
“Wi-Fi”
→
Turn on Wi-Fi
■
For iPhone/iPod touch/iPad/iPad mini
From the Home screen, “Settings”
→
“Wi-Fi”
→
Turn on Wi-Fi
From the displayed network list etc., select SSID of the product
Enter the security key (password)
•
Confirm that connection with the product is complete on the display etc. on the wireless LAN (Wi-Fi
®
)
device.
In “Manual setting” screen of the product, “Next”
→
Tap “OK”
The Home screen reappears.
Main specifications
■
Main unit
Dimensions
Approx. 53 (W)×130 (H)×14.2 (D) mm
Weight
Approx. 140 g
Interface
USB 3.0 High Speed (Type-C USB terminal)
Display
2.4 inches (320×240 dots) TFT
Power supply
5.0 V DC, 1.8A
Internal Battery
lithium-ion battery, 3.8 V, 2750 mAh
Continuous
standby
time(domestic)*
1
Via wireless LAN
(Wi-Fi
®
) access
Approx. 850 hours
Approx. 38 hours (When Quick access mode is set)
Via Bluetooth
®
access
Approx. 620 hours
Continuous
communication
time*
1
Via wireless LAN
(Wi-Fi
®
) access*
2
Approx. 540 min. (WAN : High Speed/Eco mode*
3
: Normal)
Via Bluetooth
®
access*
4
Approx. 900 min.
Operation environment
Operating ambient temperature range: 5°C - 35°C
Operating ambient humidity range: 35% - 85°C (non condensing)
Charging time
Approx. 120 min. (When TypeC Common AC Adapter 01
(0601PQA) (sold separately) is used)
*1: Continuous standby time and continuous communication time change depending on your
communication network.
*2: Time when one wireless LAN (Wi-Fi
®
) device is connected.
*3: ECO mode options can be set from the Home screen
→
ECO settings.
*4: Time when one Bluetooth
®
device is connected.
■
WAN
Compatible Networks
Domestic: WiMAX 2+, LTE
Overseas: LTE, UMTS
■
LAN
Wi-Fi
®
Compatible Networks
Wi-Fi (IEEE802.11a/b/g/n/ac-compliant)
Frequency band
2.4 GHz (1-13ch
*
1
), 5 GHz (W52, W56)
Secure Wi-Fi network
WEP: 64bit/128bit
WPA-PSK: AES/AES+TKIP
WPA2-PSK: AES/AES+TKIP
Bluetooth
®
Communication method
Compliant with Bluetooth
®
Standards Ver.4.1
Output
Bluetooth
®
Standards Power Class 2
Communication distance
Within approx. 10 m in clear view area
Bluetooth
®
profile
PAN Profile
Compatible frequency band
2.4GHz
Maximum simultaneous
connections*
2
Wireless LAN (Wi-Fi
®
): 10 devices/Bluetooth
®
: 3 devices/
USB: 1device
*1: By default setting, channel can be selected between 1 and 11 ch automatically.
*2: Simultaneous use of wireless LAN (Wi-Fi
®
) connection and Bluetooth
®
connection is not available.
■
USB3.0TypeC-A cable (sample)
Cord length
Approx. 1 m
Weight
Approx. 35 g
Interface
USB3.0 TYPE-A, USB3.0 TYPE-C
Entering number
When entering number such as PIN code, Number keyboard appears.
①
④
③
②
①
Entry field
Entered number is displayed.
②
Keys
Tap a key to enter a number assigned to
the key.
③
Cursor
Displayed at the entry point.
④
Delete
Delete an entered number.
«Example: PIN code entry screen»
•
Turn on wireless LAN (Wi-Fi
®
) and NFC function of smartphone in advance.
•
Follow the onscreen instructions of smartphone.
•
Operations vary by smartphone.
•
“Huawei HiLink” app may be required depending on Android OS version of models of smartphone.
When a URL for downloading “Huawei HiLink” app appears, refer to “
■
Connecting with “Huawei
HiLink” app” to connect.
■
Connecting with “Huawei HiLink” app
Install “Huawei HiLink” app to a smartphone and hold it over the product to connect.
Press the power button for over approximately three seconds to power on
Hold the NFC mark of smartphone over the NFC scanning area of the product
An app for scanning NFC tag activates and the URL for downloading “Huawei HiLink”
app appears.
•
Follow the instructions on the smartphone screen and connect to the scanned URL.
•
Turn on wireless LAN (Wi-Fi
®
) and NFC function in advance.
•
Operations vary by smartphone.
•
When URL is not displayed, see “Connecting with smartphone using QR code display function” to
connect.
Tap “INSTALL”
•
Check that "Huawei HiLink" app is downloaded.
Tap “OPEN”
→
“3G/4G wireless routers”
→
“Later”
Huawei HiLink home screen appears.
•
When activating for the first time, "Huawei HiLink" app introduction appears. Follow the onscreen
instructions.
Tap “Device disconnected”
→
“NFC”
Hold the NFC mark of smartphone over the NFC scanning area of the
product
When a wireless LAN (Wi-Fi
®
) signal icon is displayed on the screen of the smartphone,
the setting is complete.
* If auto-connecting fails by holding it over the NFC scanning area of the product, see
“Connecting with a smartphone using QR code display function” and retry connecting.
Checking own phone number etc.
Check device information such as a phone number or IMEI.
From the Home screen of the product, “Settings”
→
“About”
→
“Device
information”
Device information is displayed.
* Phone call is not available with the product.
Updating the software
You can set to automatically notify you of update information. The latest software can be
downloaded to update.
■
Notes
・
Make sure that the product is connected to the internet before executing the online update.
・
Make sure that the product battery level is sufficient before executing the update. Update
cannot be executed if the battery level is low. Charge the battery fully.
・
IMSI (a subscriber identity recorded on IC card etc.) and IMEI (an equipment identity
recorded on IC card etc.) will be notified to the update server for checking if the update is
needed or not for your device before the update.
・
When you failed to check the latest software, retry in a place where the signal condition is
better.
・
Charge of data communication is incurred when accessing the internet from the product
using the data communication.
・
When updating the software is needed, you will be notified on au homepage etc. For
details, contact an au shop or Customer Service Center (157/toll-free). Also, we may send
notifications from au to the Speed Wi-Fi NEXT W04 users who need software update so that
they can use the Speed Wi-Fi NEXT W04 in good condition.
・
You are recommended to back up your setting contents before the update.
・
When you failed or stopped the software update, execute it again.
・
When the software update is failed, the product may become inoperative. If the product
becomes inoperative, bring it to an au shop or PiPit (except a part of shops).
■
Setting to notify you of update information
From the Home screen of the product, “Settings”
→
“Update”
Slide the switch of “Update reminder settings” to ON
When there is software information, it is displayed on the notification screen.
Go on to tap “Update” to download and install the software.
■
Setting to automatically check the latest software
When the setting is on, appears on the Home screen of the product when the latest
software is found.
*For Speed Wi-Fi NEXT setting tool,
appears in the upper right of the screen.
From the Home screen of the product, “Settings”
→
“Update”
Slide the switch of “Auto Detect” to ON
■
Updating software automatically
When “Auto Update” is set to ON, checking the latest software, then downloading and
installing it are performed automatically. When “Auto Update” is set to OFF, you should tap
“Update” on the update notification screen to download and install the latest software.
Trademarks
・
Microsoft
®
, Windows
®
, Windows Vista
®
are trademarks or registered trademarks of Microsoft
Corporation in the United States.
・
The official name for Windows is Microsoft
®
Windows
®
Operating System.
・
Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the United States/
other countries.
・
Firefox is a registered trademark or trademark of Mozilla Foundation in the United States and/or other
countries.
・
Google, Android and Google Chrome are trademarks or registered trademark of Google Inc.
・
Opera is a trademark or registered trademark of Opera Software ASA. For details about Opera, refer to
http://jp.opera.com/.
・
Mac, Macintosh, Safari, iPhone, iPod, iPod touch, and iPad are trademarks or registered trademarks of
Apple Inc. in the United States/other countries.
・
The trademark “iPhone” is used with a license from Aiphone K.K.
・
Wi-Fi
®
, Wi-Fi Alliance
®
, Wi-Fi CERTIFIED
®
, WPA
TM
, WPA2
TM
and the logos are registered trademarks or
trademarks of Wi-Fi Alliance.
・
Wii U, Nintendo 3DS and Nintendo DS are registered trademarks or trademarks of Nintendo.
・
QR code is a registered trademark of Denso Wave Inc.
・
The Bluetooth word mark and logo are registered trademarks owned by the Bluetooth SIG, INC., and
HUAWEI TECHNOLOGIES is licensed to use these trademarks.
・
HUAWEI is a registered trademark or trademark of HUAWEI TECHNOLOGIES CO., LTD. in China.
・
Other company names and product names referred to in this manual are trademarks and registered
trademarks of respective companies. The ® marks or TM marks may be omitted in this manual.
濡れた状態での充電は、
異常な発熱 ・ 焼損などの原因となり
大変危険です。
■
Notification by animation/message
Communication status and information of failure are notified by animation or message.
Display
Description
⇒
⇒
⇒
⇒
(animation)
Charging (displayed when the power is off).
PIN lock*
PIN code of the au IC card is activated.
Insert au IC card and reboot device*
au IC card is not inserted.
*: Displayed on the unlock screen when powering on the product.
■
Learning basic operation
Frequently used operations are described.
・
To select displayed item or icon, directly tap the screen.
・
When
is displayed at the top of the screen, tap to fix selection/entry.
When is displayed, tap it to cancel selection/entry and return to the previous screen.
・
When
is displayed at the top of the screen, tap to return to the previous screen.
Tap to return to the Home screen.
・
When
(ON)/ (OFF: Gray) switch is displayed at the side of each setting item, tap the
switch to turn on/off the setting.
When the slide switch is displayed, slide the switch to turn on/off settings.
-
: Setting is on
-
(Gray): Setting is off