65
Appendix/Index
FCC RF exposure information
Your handset is a radio transmitter and receiver.
It is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set
by the Federal Communications Commission of the U.S.
Government.
The guidelines are based on standards that were developed
by independent scientific organisations through periodic
and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless handsets employs a unit
of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg.
The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for
each model. The highest SAR value for this model handset
when tested for use at the ear is 0.256 W/kg and when worn
on the body, as described in this user guide, is 0.700 W/kg.
Body–worn operation
This device was tested for typical body-worn operations
with the back of the handset kept 1.5 cm from the body. To
maintain compliance with FCC RF exposure requirements,
use accessories that maintain a 1.5 cm separation distance
between the user's body and the back of the handset. The
use of belt clips, holsters and similar accessories should
not contain metallic components in its assembly.
The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure
requirements, and should be avoided.
The FCC has granted an Equipment Authorization for this
model handset with all reported SAR levels evaluated as
in compliance with the FCC RF emission guidelines. SAR
information on this model handset is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/ea/fccid/ after searching on FCC ID
A3LSWDSCI11.
Additional information on Specific Absorption Rates (SAR)
can be found on the Cellular Telecommunications & Internet
Association (CTIA) Website at http://www.ctia.org/.
Trademarks
The company names and product names appearing in this
manual are trademarks or registered trademarks of their
respective holders.
• microSD and microSDHC are trademarks of the SD Card
Association.
• microSDHC Logo is a trademark of SD-3C, LLC.
• The Bluetooth word mark and logo are
registered trademarks owned by the
Bluetooth SIG, Inc., and Samsung Electronics
Co.,Ltd. is licensed to use these trademarks.
• Wi-Fi
®
, Wi-Fi Protected Setup™, Wi-Fi Direct™,
Wi-Fi CERTIFIED™, and the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance.
